Controlant CO 01.01 Guía de usuario descargar pdf (Pagina 7)

The transceiver is therefore able to send an indication of the current power state before going into

hibernation, making operators able to identify whether or not the device has been turned off or if there has

been a failure in the system.

On/Off Switch

Behavior

Full function of the transceiver.

Off

Hibernation mode. All modules go to

hibernation mode and wait until the switch is

turned on again.

Toggled Off for less than 2 seconds

Has no effect on the transceiver.

Toggled Off for more than 2 seconds and less

than 10 seconds

Resets all sub-systems within the transceiver.

Powers up from reset normally.

Toggled Off for more than 10 seconds

If toggled Off for more than 10 seconds the

transceiver goes into hibernation mode. The

transceiver remains in that state until the

On/Off switch is set to On again. After that the

transceiver powers on normally.

Power connector

The power connector dimensions are 2.5 x 5.5 x 14 mm as shown in Figure 3 and the polarity is shown in

Figure 4Figure 3: Mechanical drawings of the DC power plug on the CO 01.01.

Figure 3: Mechanical drawings of the DC power plug on the CO 01.01

Figure 4: Polarity of the DC power connector on the CO 01.01 wireless transceiver.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Controlant CO 01.01 Guía de usuario Pagina 7